New lower bounds on the radius of spatial analyticity for the KdV equation

The radius of spatial analyticity for solutions of the KdV equation is studied. It is shown that the analyticity radius does not decay faster than $t^{?1/4}$ as time t goes to infinity. This improves the works of Selberg and da Silva (2017) [30] and Tesfahun (2017) [34]. Our strategy mainly relies on a higher order almost conservation law in Gevrey spaces, which is inspired by the I-method.     

A general analytical method for evaluation of the thermodynamic properties of matters using virial coefficients with Morse potential at high temperature

In this paper, we established an analytical formula for the second virial coefficient (SVC) with Morse potential without using any numerical methods, and the obtained formula is applied to the calculation of the speed of sound of some matter at high temperature. This approach is based on the series expansion formula and special functions, which allows the exact evaluations of any thermodynamic properties of matter using the SVC. As an application, the obtained analytical formula is used for evaluation of the SVC with Morse potential for high‐temperature gas and the plasma region of the intermolecular interactions of neutral atom gases of B, Si, Zn, H₂, N₂, O₂, NO, CO, He, Ne, Ar, Kr , and Xe . Based on the obtained formula of SVC, the speed of sound for gases of N₂, Ar , and Zn are also determined analytically. A specific maximum temperature is chosen for every gas to ensure that there are still neutral atoms in the gas, and low temperatures are avoided due to quantum effects. The results are compared with numerical data and another analytical data from the literature. The new analytical solution is shown to be in good agreement with the compared data and is verified to supply proper thermodynamic data.     

Liquid chromatography‐tandem mass spectrometry assay for the simultaneous determination of three major flavonoids and their glucuronidated metabolites in rats after oral administration of Artemisia annua L. extract at a therapeutic ultra‐low dose

The traditional antimalarial herb Artemisia annua L., from which artemisinin is isolated, is widely used in endemic regions. It has been suggested that artemisinin activity can be enhanced by flavonoids in A. annua; however, how fast and how long the flavonoids are present in the body remains unknown. In the present study, a rapid and sensitive liquid chromatography with tandem mass spectrometry method was developed and validated for the simultaneous determination of three major flavonoids components, i.e. chrysosplenol D, chrysoplenetin, and artemetin and their glucuronidated metabolites in rats after oral administrations of A. annua extracts at a therapeutic ultra‐low dose. The concentration of the intact form was determined directly, and the concentration of the glucuronidated form was assayed in the form of flavonoids aglycones, after treatment with β‐glucuronidase/sulfatase. The method was linear in the range of 0.5–300.0 ng/mL for chrysoplenetin and artemetin, and 2–600 ng/mL for chrysosplenol D. All the validation data conformed to the acceptance requirements. The study revealed a significantly higher exposure of the flavonoid constituents in conjugated forms in rats, with only trace intact from. Multiple oral doses of A. annua extracts led to a decreased plasma concentration levels for three flavonoids.     

气体压强对纳秒激光诱导空气等离子体特性的影响

环境气体的压强对激光诱导等离子体特性有重要影响.基于发射光谱法开展了气体压强对纳秒激光诱导空气等离子体特性影响的研究,探讨了气体压强对空气等离子体发射光谱强度、电子温度和电子密度的影响.实验结果表明,在10-100 kPa空气压强条件下,空气等离子体发射光谱中的线状光谱和连续光谱依赖于气体压强变化,且原子谱线和离子谱线强度随气体压强的变化有明显差别.随着空气压强增大,激光击穿作用区域的空气密度增加,造成激光诱导击穿空气几率升高,从而等离子体辐射光谱强度增大.空气等离子体膨胀区域空气的约束作用,增加了等离子体内粒子间的碰撞几率以及能量交换几率,并且使离子-电子-原子的三体复合几率增加,因此造成原子谱线OⅠ777.2 nm与NⅠ821.6 nm谱线强度随着气体压强增大而增大,在80 kPa时谱线强度最高,随后谱线强度缓慢降低.而离子谱线N Ⅱ 500.5 nm谱线强度在40 kPa时达到最大值,气体压强大于40 kPa后,谱线强度随压强增加而逐渐降低.空气等离子体电子密度均随压强升高而增大,在80 kPa后增长速度变缓.等离子体电子温度在30 kPa时达到最大值,气体压强大于30 kPa后,等离子体电子温度逐渐降低.研究结果可为不同海拔高度的激光诱导空气等离子体特性的研究提供重要实验基础,为今后激光大气传输、大气组成分析提供重要的技术支持.     

A model for crack formation during active solid pyrolysis of a char-forming solid: crack patterns; surface area generation; volatile mass efflux

A model is developed for the formation and propagation of cracks in a material sample that is heated at its top surface, pyrolyses, and then thermally degrades to form char. In this work the sample is heated uniformly over its entire top surface by a hypothetical flame (a heat source). The pyrolysis mechanism is described by a one-step overall reaction that is dependent nonlinearly on the temperature (Arrhenius form). Stresses develop in response to the thermal degradation of the material by means of a shrinkage strain caused by local mass loss during pyrolysis. When the principal stress exceeds a prescribed threshold value, the material forms a local crack. Cracks are found to generally originate at the surface in response to heating, but occasionally they form in the bulk, away from ever-changing material boundaries. The resulting cracks evolve and form patterns whose characteristics are described. Quantities examined in detail are: the crack spacing in the pyrolysis zone; the crack length evolution; the formation and nature of crack loops which are defined as individual cracks that have joined to form loops that are disconnected from the remaining material; the formation of enhanced pyrolysis area; and the impact of all of the former quantities on mass flux. It is determined that the mass flux from the sample can be greatly enhanced over its nominal (non-cracking) counterpart. The mass efflux profile qualitatively resembles those observed in Cone Calorimeter tests.     

Identification and quantification of main flavonoids in the leaves of Bambusa multiplex cv. Fernleaf

Abstract

The chemical profile of Bambusa multiplex cv. Fernleaf (B. multiplex) leaves was analysed by UPLC-DAD-Q-TOF-MS. Twelve compounds were identified and C-glycosyl flavonoids, including vitexin, isovitexin, isoorientin and its derivatives, are the main constitutes of the plant. Besides, a HPLC method for isoorientin quantification was developed. The RSD of retention time and peak area were 0.05% and 2.04% for six times analysis of isoorientin with concentration of 20?μg/mL. The recovery of isoorientin in real sample was 99.2%. The general trend of isoorientin content in B. multiplex leaves was that it steady increased from Jan. to May, and then quickly decreased. The maximum was found on May with value of 4.7?mg/g. The lowest level of isoorientin was found during Aug. to Nov. with value of about 1.66?mg/g. In different seasons, isoorientin is always the most dominant flavonoid which was accounted for about 50% of total flavonoids in the sample.     

Sensitive CE-MS method for monitoring of riociguat and desmethylriociguat levels in human serum

Riociguat is novel antihypertensive drug for treatment of pulmonary hypertension. As such, it is still being tested in many clinical and pharmacokinetic trials. Existing methods that determine serum riociguat and desmethylriociguat (DMR) are based solely on liquid chromatography with mass spectrometry. Therefore, we present a novel capillary electrophoresis with mass spectrometry method (CE-MS) for their determination in human serum as alternative method for ongoing trials. Complete resolution of both analytes was achieved by means of pH optimization of ammonium formate background electrolytes that are fully compatible with ESI/MS detection. Simple liquid-liquid extraction was used as sample pretreatment. The calibration dependence of the method was linear (in the range of 10–1000 ng/mL), with adequate accuracy (90.1–114.9%) and precision (13.4%). LOD and LOQ were arbitrarily set at 10 ng/mL for both analytes. Clinical applicability was validated using serum samples from patients treated with riociguat in pharmacokinetic study and the results corresponded with reference HPLC-MS/MS values. Capillary electrophoresis proved to be sensitive and selective tool for the analysis of riociguat and DMR.     

Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.